Euroquartz SMD Oscillators



SMD OSCILLATORS CMOS/TTL

All oscillator products are RoHS compliant unless otherwise indicated.

There are two separate menus, Table 1 for 7x5mm SMD (XO91) packages and Table 2 for all other SMD clock oscillators.

TABLE 1: 7 x 5mm SMD OSCILLATORS

TYPE
DESCRIPTION
SUPPLY
VOLTAGE
SPEC.

XO91

STANDARD CLOCK OSCILLATORS
500kHz~125MHz
±10ppm to ±100ppm
Commercial 0°~+70°C, -20°~+70°C
Industrial -40°~+85°C
Military -55 +105°C

1.8 Volt
2.5 Volt
3.3 Volt
5.0 Volt

XOV91

HIGH FREQUENCY RANGE
125MHz~200MHz
±10ppm to ±100ppm
Commercial 0°~+70°C
Industrial -40°~+85°C

2.5 Volt
3.3 Volt

XOA91

ULTRA-LOW JITTER/PHASE NOISE
125MHz~260MHz
±10ppm to ±100ppm
Commercial 0°~+70°C
Industrial -40°~+85°C

2.5 Volt
3.3 Volt

XOK91

LOW POWER VERSION <1.7mA
10MHz~50MHz
Commercial 0°~+70°C
Industrial -40°~+85°C

1.8 Volt
2.5 Volt
3.3 Volt

XO95
MIL CMOS

FULL MIL. APPROVED
1.25MHz ~ 125MHz
±50ppm or ±100ppm
-55° ~ +125°C
Enable/Disable option

5.0 Volt
3.3 Volt

XO95-TEST
MIL TEST SCHEDULE for XO95 series oscillators

TAPE & REEL

Tape and reel specifications for XO91 and XO95 series oscillators (7x5mm)

SOLDER TEMPERATURE

Solder temperature specification for
SMD oscillators

**TABLE 1: 7 x 5mm SMD OSCILLATORS**
TYPE	DESCRIPTION	SUPPLY VOLTAGE	SPEC.
XO91		STANDARD CLOCK OSCILLATORS 500kHz~125MHz ±10ppm to ±100ppm Commercial 0°~+70°C, -20°~+70°C Industrial -40°~+85°C Military -55 +105°C	1.8 Volt 2.5 Volt 3.3 Volt 5.0 Volt
XOV91		HIGH FREQUENCY RANGE 125MHz~200MHz ±10ppm to ±100ppm Commercial 0°~+70°C Industrial -40°~+85°C	2.5 Volt 3.3 Volt
XOA91		ULTRA-LOW JITTER/PHASE NOISE 125MHz~260MHz ±10ppm to ±100ppm Commercial 0°~+70°C Industrial -40°~+85°C	2.5 Volt 3.3 Volt
XOK91		LOW POWER VERSION <1.7mA 10MHz~50MHz Commercial 0°~+70°C Industrial -40°~+85°C	1.8 Volt 2.5 Volt 3.3 Volt
XO95 MIL CMOS		FULL MIL. APPROVED 1.25MHz ~ 125MHz ±50ppm or ±100ppm -55° ~ +125°C Enable/Disable option	5.0 Volt 3.3 Volt
XO95-TEST	MIL TEST SCHEDULE for XO95 series oscillators
TAPE & REEL	Tape and reel specifications for XO91 and XO95 series oscillators (7x5mm)
SOLDER TEMPERATURE	Solder temperature specification for SMD oscillators

TABLE 2: SMD CLOCK OSCILLATORS

TYPE
DESCRIPTION
SUPPLY
VOLTAGE
SPEC.

XO53 Series
CMOS
5 x 3.2mm

1.0MHz ~ 125MHz
±25ppm to ±100ppm
Commercial 0 ~ +70°
Industrial -40° to +85°C

3.3 Volt
2.5 Volt
1.8 Volt

XO32 Series
CMOS
3.2 x 2.5mm

1.0MHz ~ 54MHz
±25ppm to ±100ppm
Commercial 0 ~ +70°
Industrial -40° to +85°C

1.8 Volt
2.5 Volt
3.3 Volt

XOK53 Series
CMOS
5 x 3.2mm

LOW POWER <1.7mA
5 x 3.2 x 1.0mm
16MHz~50MHz
Commercial 0°~+70°C
Industrial -40°~+85°C

1.8 Volt
2.5 Volt
3.3 Volt

XO64 Series
CMOS 32.768kHz
6.5 x 4mm

32.768kHz
Very low power <5uA
SMD 6.5 x 4mm
Enable/Disable as standard

1.5 Volt
to
6.0 Volt

TAPE & REEL
Tape and reel specifications for XO53 series oscillators (5x3.2mm)

SOLDER TEMPERATURE

Solder temperature specification for
SMD oscillators

XO90 Series
CMOS
13 x 9mm

SMD 13mm x 9mm
Resin encapsulated
1.0MHz to 70MHz
±50ppm to ±100ppm
Commercial 0° ~ +70°C or
Industrial -40° ~ +85°C

5.0 Volt
3.3 Volt

XO44 Series
CMOS
11.4 x 9.6mm

SMD 9.6 x 11.4 x 4.7mm
1.0MHz to 160MHz
±25 to ±100ppm
Commercial 0°~+70°C or
Industrial -40° ~ +85°C

5.0 Volt
3.3 Volt

EQXO-1000GW
CMOS
14 pin DIL SMD

14 pin DIL SMD Gull-wing
30kHz~160MHz
Commercial 0°~+70°C
Industrial -40°~+85°C
Extended Industrial at -55°~+105°C
±15ppm to ±100ppm

5.0 Volt
3.3 Volt

EQXO-2000GW
CMOS
8 pin DIL SMD

8 pin DIL SMD Gull-wing
30kHz~160MHz
Commercial 0°~+70°C
Industrial -40°~+85°C
Extended Industrial at -55°~+105°C
±15ppm to ±100ppm

5.0 Volt
3.3 Volt

LSM
Low frequency
Tight specification

10.16 x 4.57 x 1.8mm SMD
30kHz~2.1MHz
Commercial 0°~+70°C
Industrial -40°~+85°C
Military -55°~+125°C
Enable/Disable option
Full MIL testing available

30kHz
-
200kHz

700kHz
-
2.1MHz

**TABLE 2: SMD CLOCK OSCILLATORS**
TYPE	DESCRIPTION	SUPPLY VOLTAGE	SPEC.
XO53 Series CMOS 5 x 3.2mm		1.0MHz ~ 125MHz ±25ppm to ±100ppm Commercial 0 ~ +70° Industrial -40° to +85°C	3.3 Volt 2.5 Volt 1.8 Volt
XO32 Series CMOS 3.2 x 2.5mm		1.0MHz ~ 54MHz ±25ppm to ±100ppm Commercial 0 ~ +70° Industrial -40° to +85°C	1.8 Volt 2.5 Volt 3.3 Volt
XOK53 Series CMOS 5 x 3.2mm		LOW POWER <1.7mA 5 x 3.2 x 1.0mm 16MHz~50MHz Commercial 0°~+70°C Industrial -40°~+85°C	1.8 Volt 2.5 Volt 3.3 Volt
XO64 Series CMOS 32.768kHz 6.5 x 4mm		32.768kHz Very low power <5uA SMD 6.5 x 4mm Enable/Disable as standard	1.5 Volt to 6.0 Volt
TAPE & REEL	Tape and reel specifications for XO53 series oscillators (5x3.2mm)
SOLDER TEMPERATURE	Solder temperature specification for SMD oscillators
XO90 Series CMOS 13 x 9mm		SMD 13mm x 9mm Resin encapsulated 1.0MHz to 70MHz ±50ppm to ±100ppm Commercial 0° ~ +70°C or Industrial -40° ~ +85°C	5.0 Volt 3.3 Volt
XO44 Series CMOS 11.4 x 9.6mm		SMD 9.6 x 11.4 x 4.7mm 1.0MHz to 160MHz ±25 to ±100ppm Commercial 0°~+70°C or Industrial -40° ~ +85°C	5.0 Volt 3.3 Volt
EQXO-1000GW CMOS 14 pin DIL SMD		14 pin DIL SMD Gull-wing 30kHz~160MHz Commercial 0°~+70°C Industrial -40°~+85°C Extended Industrial at -55°~+105°C ±15ppm to ±100ppm	5.0 Volt 3.3 Volt
EQXO-2000GW CMOS 8 pin DIL SMD		8 pin DIL SMD Gull-wing 30kHz~160MHz Commercial 0°~+70°C Industrial -40°~+85°C Extended Industrial at -55°~+105°C ±15ppm to ±100ppm	5.0 Volt 3.3 Volt
LSM Low frequency Tight specification		10.16 x 4.57 x 1.8mm SMD 30kHz~2.1MHz Commercial 0°~+70°C Industrial -40°~+85°C Military -55°~+125°C Enable/Disable option Full MIL testing available	30kHz - 200kHz
700kHz - 2.1MHz

Custom Parts and Quick Turn-round

Most standard frequency and specification SMD oscillators are held in stock available for immediate despatch. Custom frequency and specification oscillators can be manufactured quickly and cost-effectively. For custom, made-to-order oscillator orders, standard Euroquartz delivery is 15 working days with options for 10, 7, 5 and 3 day turn-round. Detailed specification for any part is available via the PDF icon.

Back to Oscillator Selection Page
Back to Main Product Listing page