Product development at
Euroquartz is a continual process. New products and services
are initially announced on this page. Check this page frequently
to keep abreast of developments.
7x5mm SMD oscillators - high frequencies with
low phase noise and jitter performance
The new range of Euroquartz
7x5mm SMD high frequency oscillators provide frequencies from
125MHz to 260MHz in the industry-standard 7x5mm SMD package.
There are two separate series available, XOV91
series oscillators provide 125MHz o 200MHz with low phase and
jitter at low cost while the XOA91 series
parts perform with an ultra-low phase noise and jitter at frequencies
from 125MHz to 260MHz. Details are on the SMD
OSCILLATORS page.
T75
- new rugged TCXO in 7x5mm package
Euroquartz have introduced
a new range of high-reliability, rugged TCXOs. Designated the
T75 range, these TCXOs are produced in the industry-standard
7x5mm SMD package. Frequency range is 10MHz to 50MHz. The TCXOs
have very tight tolerances available and can withstand shock
<100,000g. Details on the TCXO page.
8 PIN DIL HIGH SPECIFICATION MILITARY OSCILLATOR
Euroquartz have introduced
a new high-reliability oscillator. Designated the EQXO-2000BM
series this new oscillator packaged in the popular 8 pin DIL
format complements the EQXO-1000BM series of 14 pin DIL oscillators
which have gained many design wins since their introduction 12
years ago. The part will withstand severe environmental conditions
and may also be produced in a Radiation Tolerant form, ideal
for upper atmosphere and space applications. Full details are
available from the Military
Oscillators page.
T90
- new range of high-reliability TCXOS
Euroquartz have introduced
a new range of high-reliability TCXOs. Designated the T90 range,
these TCXOs are available from 10MHz to 200MHz, have very tight
tolerances available and can withstand shock <100,000g. Details
on the TCXO page.
NEW RANGE LOW POWER SMD OSCILLATORS
Euroquartz have introduced
a new micro-miniature SMD VCXO. Packaged in a 5mm x 3.2mm SMD
package this well-specified part provides the smallest footprint
VCXO available. Full details available on the oscillator
page.
New
micro-miniature SMD VCXO introduced
Euroquartz have introduced
a new micro-miniature SMD VCXO. Packaged in a 5mm x 3.2mm SMD
package this well-specified part provides the smallest footprint
VCXO available. Full details available here
in .pdf format, or on the VCXO page.
New
micro-miniature 32.768kHz SMD oscillators introduced
Euroquartz have introduced
a new micro-miniature 32.768kHzx SMD oscillator. The oscillator
is designed to be used with battery powered hand-held equipment
where its very supply current of <5 micro Amps couple with
a power saving Tristate function provides an ideal source of
real time clock frequency. The oscillator can be supplied with
any voltage from 1,5 Volts to 6.0 Volts. Full details available
here in .pdf format, or on the SMD oscillator page.
New
32.768kHz ultra-miniature 32.768kHz watch crystal
The Euroquart EQ157 watch
crystal has been introduced to serve the increasing demand for
ultra-miniature 32.768kHz watch crystals. The crystal has dimensions
of 3.2 mm x 1.3mm x 0.95mm and is an ideal choice for battery-powered,
hand held equipment or any application where small size of components
is essential. Details and full specification will be found on
the SMD Crystals page. Scroll
down the product table to EQ157.
Low
EMI oscillators - New range and technical service.
Euroquartz have amended
their range of Spread Spectrum Technology (SST) osciilators.
There is a new 7x5mm SMD packaged part with lower jitter performance
and a DESIGNERS KIT has been introduced to facilitate modulation
spread and rate for any system. Full details and comprehensive
technical notes are to be found on the SST
page.
Euroquartz now produce
TO5 crystals 'in-house' providing quick delivery (less than 15
working days from order) for these high-stability crystals. A
full range of frequencies and specifications is available. TO5
(also known by the American Standard name as HC-35U) crystals
have a large designin base amongst manufacturers of aerospace
and defence electronics, where their 'three-point mounting' system
provides a cloase tolerance crystal that has very good resistance
to shock and vibration.
Euroquartz have launched
a range of Synchronous Timing Modules. The 'TMB' unit consists
of a PLL module that generates LVPECL outputs up to 622.080MHz
from a low-jitter VCXO. The module is locked to one of two 8kHz
reference inputs, software selectable. PECL and complimentary
PECL outputs can be disabled, and an alarm signal is generated
when ‘Loss Of Lock’ or ‘Loss Of Reference’
occurs, the module then entering into Free Run mode.
The 'TMA' module provides
CMOS outputs <77.760MHz with a choice of input reference frequencies.
Applications include Line
Cards and Service Termination Cards for SONET, SDH, ATM and PDH
network equipment.
The Euroquartz range of
TCXOs and OCXOs meeting STRATUM III stability requirements have
been updated. For full details see the STRATUM
III Oscillators page
Euroquartz has developed
and launched a new range of UM-1SL (Slimline) crystals. The crystals
offer the same specifications as standard UM-1 crystals but are
produced in a package with width of 1.8mm. THe part is particualrly
suitable for pagers and similar hand-held communications equipment
where low mass, small footprint crystals are needed. Full details
are avialable from the Leaded Crystals
page.
UPDATED AND EXPANDED RANGE OF ECL AND PECL OUTPUT
VCXOs
The Euroquartz range of
ECL and PECL output VCXOs has been amended and increased. The
range includes VCXOs with very low jitter, <1ps, using inverted
MESA crystals operating in fundamental mode to give the lowet
possible jitter performance. The range also includeds lower-cost,
VCXOs with standard jitter performance. The range may be inspected
at the VCXO page.
Euroquartz have just completed
installation of new production machinery and techniques for production
of new products and and to enlarge and expand the range of frequencies
and specifications of existing product ranges. Euroquartz now
produce quartz crystals and oscillators in both leaded and SMD
types, with the recent introduction of a whole new range of SMD
VCXOs. Details here
SALES
FRANCE - EUROQUARTZ REPRESENTATIVE IN FRANCE
Euroquartz have appointed
M. Michel Ollivier as their representative in France. Michel
has wide experience of the electronics manufacturing in France
and offers customers a prompt and knowledgeable service.
Euroquartz have launched
a new range of ECL/PECL output oscillators. The freq uency range
covered is from 19.44MHz to 250MHz. Together with a wide choice
of output options and stabilities the range meets the frequency-control
requirements of many new equipment designs. Check the specifications
here.
The Euroquartz range of
TCXOs has been revised and expanded. There are a wide range of
package styles, stability and temperature ranges and input voltages
available, together with choice of CMOS or Sinewave outputs.
Available frequency range is < 60.0MHz. Several models of
TCXO are are available with quick delivery in as little as two
weeks from date of order for standard frequencies. See details
in the TCXO section.
The Euroquartz range of
ECL and PECL oscillators has been significantly revised and improved.
Of particular interest are the HE and HP ranges offering exceptionally
low period jitter. For specification details see PECL
or ECL pages.
PRODUCTS, PRESS RELEASES
and EVENTS